Water-care guides
Hot tub water-care guides: why pH rises, how to lower alkalinity, hard-water fill day, foam, and cloudy water. Then Water Match for your ZIP.
Why hot tub pH keeps rising
Jets strip CO₂ and carbonate alkalinity pushes pH up. How low-TA setup and a proper borate buffer change the ritual — water chemistry only.
Read guide
How to lower alkalinity in a hot tub
How to lower total alkalinity (TA) in a hot tub: dry acid in stages, a strip retest after each step, and when to stop. No soaking until pH is at least 7.2.
Read guide
Start-up chemicals for hard-water hot tubs
Hard fill (high calcium / high TA) needs a different fill day than soft water. ALK− first, then borate buffer — matched counts, not a one-size bottle.
Read guide
What to do about hot tub foam
Foam usually means soft water, oils/lotions, or both. Calcium where needed, enzyme/oxidizer for organics, and when defoamer is only a bandage.
Read guide
Why is my hot tub water cloudy?
Cloudy spa water usually comes down to sanitizer, then pH and alkalinity, then the filter. The order to check, and when hard fill water is the cause.
Read guide
How to raise calcium hardness in a hot tub
Soft fill water and low calcium: when to raise it on fill day, how to raise hardness in small steps, and what Water Match Soft means.
Read guide
How to shock a hot tub, and when you should
Shock is a big oxidizer dose that burns off sweat, oils and chloramines. Chlorine vs non-chlorine shock, when to use it, and why sanitizer still matters.
Read guide
How to clean a hot tub filter
Rinse, soak, and reinstall a hot tub filter cartridge: maker-manual steps first, how often to clean, and when a filter is worn out.
Read guide
Too much chlorine in your hot tub: how to bring it down
Test first, then cover off and jets on: how high chlorine drops on its own, when to swap in fresh water, and why a strong smell often means the opposite.
Read guide